Resource Hub
Recipes
Beard Soap Recipe

Beard Soap Recipe

Beard soap gently helps cleanse facial hair and the skin beneath, removing dirt and buildup while leaving your b...

Beard soap gently helps cleanse facial hair and the skin beneath, removing dirt and buildup while leaving your beard soft, fresh, and manageable.

Shopping List

3 oz. Natural Low Profile Jar & Lid Set

10 pc

Lye- Sodium Hydroxide

2 lb

Coconut Oil 76

16 oz

Jojoba Oil

1 oz

Fir Needle Siberian Essential Oil - 100% Pure

1 oz

16 oz

16 oz

16 oz

4 oz

16 oz

Golden Natural Cocoa Butter

12 oz

Shea Butter (Refined)

12 oz

Cutter for Mitre Box - Stainless Steel

1 pc

Mitre Box - Stainless Steel

1 pc

Safety Glasses for Soap Making

1 pc

Safety Soap Making Gloves

1 pc

Silicone Loaf Mold

1 pc

Directions

Step 1

Although we have this recipe listed under hot process soap recipes, this recipe could be used to make cold process soap instead if you desire. Same recipe, different process.

Step 2

Clean and sanitize your work area and all of your packaging materials. We recommend that you wear gloves, protective clothing, a face mask, safety glasses, and a hair net while preparing this recipe. Before preparing this recipe, familiarize yourself with and follow safe soap making procedures.

Step 3

First, in one bowl, weigh out 340 grams Coconut Oil 76, 68 grams Jojoba Oil, 163 grams Sweet Almond Oil, 68 grams Olive Oil Pomace, 68 grams Castor Oil, 41 grams Lanolin Oil, 68 grams Sesame Oil, 272 grams Cocoa Butter Golden Natural, and 272 grams Shea Butter.

Step 4

Now, turn your crockpot on a low heat setting. Place all of your oils and butters into the crockpot. Heat these ingredients until they are all in a liquid state. Stir periodically as they are melting.

Step 5

While you are waiting for your ingredients to melt, weigh out 182 grams Lye and 517 grams Distilled Water in separate bowls.

Step 6

Then, slowly begin adding small amounts of the lye to the water, stirring in between the addition of the lye to the water. Never add the water to the lye.

Step 7

Next, slowly add the lye mixture to the crockpot and stir.

Step 8

Stick blend the mixture in the crockpot until your batter reaches trace.

Step 9

Place the lid on your crockpot at this time and keep the crockpot on a low setting.

Step 10

31. Step 9: Stir your mixture occasionally to ensure the soap cooks evenly. You will want to stir it about every 15 minutes or so.

Step 11

Once your mixture takes on a mashed potatoes appearance, it is time to add the fir needle essential oil. Cooking time will vary, but it usually takes about an hour. Add the essential oil and stir to fully incorporate the oil.

Step 12

Add the soap to each cavity of the mold. Then, lift your mold slightly and tap it on the table to release any air bubbles. Allow the soap to cool and harden.

Step 13

Once the soap has hardened, remove it from the molds. Then, slice the soap with your mitre box and cutter. Let it cure for at least 2 weeks before using,

To Use

To use beard soap, wet your beard with warm water, lather the soap between your hands or directly on your beard, massage it through the hair and skin, then rinse thoroughly.

General

Natures Garden is not responsible for the performance of any of the recipes provided on our website. Testing is your responsibility. If you plan to resell any recipes we provide, it is your responsibility to adhere to all FDA regulations if applicable. If there are ingredients listed in a recipe that Natures Garden does not sell, we cannot offer any advice on where to purchase those ingredients. We also do not offer any advice on formulating or altering recipes.

Tags: Soaps

Recipe Ingredients

3 oz Natural Low Profile Jar & Lid Set
Lye- Sodium Hydroxide
Coconut Oil 76
Jojoba Oil
Fir Needle Siberian Essential Oil - 100% Pure
Sweet Almond Oil
136 grams Olive Oil (Pomace)
Castor Oil
Lanolin Oil
Sesame Seed Oil
56 grams Golden Natural Cocoa Butter
200 grams Shea Butter (Refined)
Cutter for Mitre Box - Stainless Steel
Mitre Box - Stainless Steel
Safety Glasses for Soap Making
Safety Soap Making Gloves

Equipment From Home

Crockpot
Stick Blender
Scale
Mixing Bowls (2)
Rubber Spatula

Directions

Although we have this recipe listed under hot process soap recipes, this recipe could be used to make cold process soap instead if you desire. Same recipe, different process.

While you are waiting for your ingredients to melt, weigh out 182 grams Lye and 517 grams Distilled Water in separate bowls.

Then, slowly begin adding small amounts of the lye to the water, stirring in between the addition of the lye to the water. Never add the water to the lye.

Next, slowly add the lye mixture to the crockpot and stir.

Stick blend the mixture in the crockpot until your batter reaches trace.

Place the lid on your crockpot at this time and keep the crockpot on a low setting.

31. Step 9: Stir your mixture occasionally to ensure the soap cooks evenly. You will want to stir it about every 15 minutes or so.

Add the soap to each cavity of the mold. Then, lift your mold slightly and tap it on the table to release any air bubbles. Allow the soap to cool and harden.

Once the soap has hardened, remove it from the molds. Then, slice the soap with your mitre box and cutter. Let it cure for at least 2 weeks before using,

To Use

To use beard soap, wet your beard with warm water, lather the soap between your hands or directly on your beard, massage it through the hair and skin, then rinse thoroughly.

General