Mini Cube Wax Melts Recipe

1. Weigh out and melt 5 ounces of the Pillar of Bliss to 195F using a double boiler. Stir periodically while it is melting.

2. Once melted, allow the temperature to drop to 185F. Add 0.5 ounces of the Oakmoss Fragrance Oil. Stir.

3. When the temperature is at 175F, use a pipette to fill each cavity of the Mini Cubes Silicone Mold. Alternatively, you can pour the wax into the mold. However, you will want to make sure you place the mold on a baking sheet prior to pouring. You will also want to make sure you have some extra wax as some may flow out of the mold as you are filling the mold.

4. Once the wax has set up, remove it from the mold. Set aside for now.

5. Once again, weigh out and melt 5 ounces of the Pillar of Bliss to 195F using a double boiler. Also, add a small amount of the bown color block. We used less than 1 gram. Stir periodically while it is melting.

6. Once melted, allow the temperature to drop to 185F. Add 0.5 ounces of the Oalmoss Fragrance Oil. Stir.

7. When the temperature is at 175F, use a pipette to fill each cavity of the Mini Cubes Silicone Mold in the same manner you did before. Once the wax has set up, remove it from the mold. Set aside for now.

8. Once again, weigh out and melt 5 ounces of the Pillar of Bliss to 195F using a double boiler. Also, add a small amount of the green color block. We used less than 1 gram. Stir periodically while it is melting.

9. Once melted, allow the temperature to drop to 185F. Add 0.5 ounces of the Oakmoss Fragrance Oil. Stir.

10. When the temperature is at 175F, use a pipette to fill each cavity of the Mini Cubes Silicone Mold in the same manner you did before.

11. Once the wax has set up, remove it from the mold.

12. If you have purchased the kit, you will have enough ingredients to create this recipe twice.

13. Place all of your cubes in a mixing bowl or bag. Mix them together. Place them in the jars.