Wax Dot Melts Recipe

By Nature's Garden Aug 15, 2025

Yield: (2) 4 oz. Jars of Wax Melts

Jump To Directions

Recipe Ingredients

Equipment From Home

Shopping List

Beachwood Vetiver Fragrance Oil

4 fl oz

Magenta Candle Dye Blocks

Black Candle Dye Blocks

Soap and Candle Thermometer

1 pc

Candle Pouring Pot for Candle Making

1 pc

4 oz. Clear PET Plastic Cosmetic Jar

10 pc

White Straight Lid Smooth 58/400

10 pc

Disposable Pipettes

10 pc

Pillar of Bliss Wax

10 lb

Directions

Step 1

1. Other Ingredients & Equipment You'll Need:

Step 2

2. Mixing Spoon

Step 3

3. Scale

Step 4

4. Pot (for double boiler)

Step 5

5. 36 Cavity Small Dots Mold (2)

Step 6

6. Apron

Step 7

7. Step 1: First, weigh out and melt 46 grams of the Pillar of Bliss Wax. Add a small amount of the magenta color block. You will use less than 1 gram of the color block. Add enough of the color block to create a light magenta color. Stir to fully blend the candle colorant.

Step 8

8. Step 2: Add 4 grams of the Beachwood Vetiver Fragrance Oil. Stir.

Step 9

9. Step 3: Now, using the pipette fill the two dot molds with wax. Allow them to set up before removing them from the mold. Note: We used a 36 cavity mold, filling two of them.

Step 10

10. Step 4: Next, we will create darker magenta wax melts. Weigh out and melt 46 grams of the Pillar of Bliss Wax. Once again, add a small amount of the magenta color block. Stir. This time you will add about four times as much color block as you used for the lighter color.

Step 11

11. Step 5: Add 4 grams of the Beachwood Vetiver Fragrance Oil. Stir.

Step 12

12. Step 6: Add the wax into the molds using a pipette. Allow them to set up. Remove them from the mold.

Step 13

13. Step 7: Weigh out and melt 46 grams of the Pillar of Bliss Wax. Add a small amount of the black color block. You will use less than 1 gram of the color block. Add enough of the color block to create a gray color. Stir to fully blend the candle colorant.

Step 14

14. Step 8: Add 4 grams of the Beachwood Vetiver Fragrance Oil. Stir.

Step 15

15. Step 9: Add wax to the two dot molds using a pipette. Allow them to set up. Remove them from the molds.

Step 16

16. Step 10: Weigh out and melt 46 grams of the Pillar of Bliss Wax. Once melted, add 4 grams of the Beachwood Vetiver Fragrance Oil. Stir. Using a pipette, add the wax into the dot molds. Allow the wax to set up before removing them from the molds.

Step 17

17. Step 11: Your wax dots will make two 4 oz jars. We chose to mix our dots together before adding them to the jars. You could also layer them if you prefer.

Step 18

18. Your Wax Dot Melts are ready to use! Simply place a few of the dots in your burner to use it! Enjoy!!!

To Use

Natures Garden is not responsible for the performance of any of the recipes provided on our website. Testing is your responsibility. If you plan to resell any recipes we provide, it is your responsibility to adhere to all FDA regulations if applicable. If there are ingredients listed in a recipe that Natures Garden does not sell, we cannot offer any advice on where to purchase those ingredients. We also do not offer any advice on formulating or altering recipes.

Tags: Candles