Resource Hub
Recipes
Energize Cold Process Soap Recipe

Energize Cold Process Soap Recipe

By Nature's Garden Aug 15, 2025

https://www.naturesgardencrafts.com/blogs/recipes/energize-cold-process-soap-recipe

Yield: Recipe makes approximately 1 heaped pound loaf of soap.

Jump To Directions

Recipe Ingredients

3 oz Natural Low Profile Jar & Lid Set
Lye- Sodium Hydroxide
200 grams Shea Butter (Refined)
Meadowfoam Seed Oil
Grapeseed Oil
Coconut Oil 76
Apricot Kernel Oil
Castor Oil
Grapefruit Lemongrass Energize Fragrance Oil
Oil and Water Soluble Titanium Dioxide Powder
FUN Yellow Neon Soap Dye
FUN Pink Neon Soap Dye
Sodium Lactate
Safety Glasses for Soap Making
Safety Soap Making Gloves
Candle Pouring Pot for Candle Making

Equipment From Home

Shopping List

3 oz. Natural Low Profile Jar & Lid Set

10 pc

Lye- Sodium Hydroxide

2 lb

Shea Butter (Refined)

12 oz

4 oz

16 oz

16 oz

16 oz

16 oz

Grapefruit Lemongrass Energize Fragrance Oil

Oil and Water Soluble Titanium Dioxide Powder

1 oz

FUN Yellow Neon Soap Dye (1 oz.)

1 oz

FUN Pink Neon Soap Dye (1 oz.)

1 oz

Sodium Lactate

1 lb

Safety Glasses for Soap Making

1 pc

Safety Soap Making Gloves

1 pc

Soap and Candle Thermometer

1 pc

Directions

Step 1

1. Other Ingredients Needed:

Step 2

2. Mask

Step 3

3. Water

Step 4

4. 3 mixing bowls (for colors)

Step 5

5. Spatula

Step 6

6. Total Recipe Weights:

Step 7

7. 172 grams of water

Step 8

8. 61 grams of Lye

Step 9

9. 118 grams of Shea Butter

Step 10

10. 68 grams of Meadowfoam Seed Oil

Step 11

11. 54 grams of Grapeseed Oil

Step 12

12. 113 grams of Coconut Oil 76

Step 13

13. 64 grams of Apricot Kernel Oil

Step 14

14. 36 grams of Castor Oil

Step 15

15. 28 grams of Grapefruit Lemongrass Energize Fragrance Oil

Step 16

16. 20 grams of Sodium LactateSoap Colorant Weights:4 grams of Titanium Dioxide

Step 17

17. 5 grams of FUN Soap Colorant- Neon Pink

Step 18

18. 5 grams of FUN Soap Colorant- Neon Yellow

Step 19

19. Step 1:Put on your safety gear and prep your work area.

Step 20

20. Step 2: Then, make your lye solution. Now, weigh out and melt the soaping oils and butters. Once melted, separate out 10 grams and place it in one of your mixing bowls. Then, add the titanium dioxide to this and stir well to make a white paste.

Step 21

21. Step 3: When the lye solution has cooled, add and stir in the sodium lactate.

Step 22

22. Step 4: When both the lye solution and soaping oils are ready to be combined, do so. Then, stick blend for emulsion. Next, add the fragrance oil and once again, stick blend to incorporate.

Step 23

23. Step 5: Now, get your 2 empty mixing bowls. To the first bowl, add the neon pink soap colorant. To the second bowl add the neon yellow soap colorant. Then, to each bowl add 151 grams of soap batter. Using a spoon, stir each batter bowl to incorporate the color. Then, set aside.

Step 24

24. Step 6: To the remaining soap batter bowl, add the white paste and stick blend in to mix. Get Ready to Move! Starting with the pink soap batter drop several "plops" in a clockwise like manner around the white soap batter bowl. Do this until all of the pink batter is gone. Then, repeat the same action with the yellow batter, aiming for different areas in the clock.

Step 25

25. Step 7: Now, drag the spatula is a large circular pattern once through the bowl. Directly pick up the spatula when completed.

Step 26

26. Step 8: Next, carefully and slowly pour the soap batter into the mold. While pouring, move the soap back and forth through the whole length of the mold. When the soap has set up enough, take the remaining soap and heap it on top. Finally, insulate.

Step 27

27. Step 9: After 24 hours, remove the soap from the mold. Then, with a knife, slice the bars. Allow them to further cure before using.

Step 28

28. We hope that you enjoy our Energize Cold Process Soap Recipe!

To Use

Natures Garden is not responsible for the performance of any of the recipes provided on our website. Testing is your responsibility. If you plan to resell any recipes we provide, it is your responsibility to adhere to all FDA regulations if applicable. If there are ingredients listed in a recipe that Natures Garden does not sell, we cannot offer any advice on where to purchase those ingredients. We also do not offer any advice on formulating or altering recipes.

Tags: Soaps

Recipe Ingredients

3 oz Natural Low Profile Jar & Lid Set
Lye- Sodium Hydroxide
200 grams Shea Butter (Refined)
Meadowfoam Seed Oil
Grapeseed Oil
Coconut Oil 76
Apricot Kernel Oil
Castor Oil
Grapefruit Lemongrass Energize Fragrance Oil
Oil and Water Soluble Titanium Dioxide Powder
FUN Yellow Neon Soap Dye
FUN Pink Neon Soap Dye
Sodium Lactate
Safety Glasses for Soap Making
Safety Soap Making Gloves
Candle Pouring Pot for Candle Making

Equipment From Home

Directions

1. Other Ingredients Needed:

2. Mask

3. Water

4. 3 mixing bowls (for colors)

5. Spatula

6. Total Recipe Weights:

7. 172 grams of water

8. 61 grams of Lye

9. 118 grams of Shea Butter

10. 68 grams of Meadowfoam Seed Oil

11. 54 grams of Grapeseed Oil

12. 113 grams of Coconut Oil 76

13. 64 grams of Apricot Kernel Oil

14. 36 grams of Castor Oil

15. 28 grams of Grapefruit Lemongrass Energize Fragrance Oil

16. 20 grams of Sodium LactateSoap Colorant Weights:4 grams of Titanium Dioxide

17. 5 grams of FUN Soap Colorant- Neon Pink

18. 5 grams of FUN Soap Colorant- Neon Yellow

19. Step 1:Put on your safety gear and prep your work area.

21. Step 3: When the lye solution has cooled, add and stir in the sodium lactate.

22. Step 4: When both the lye solution and soaping oils are ready to be combined, do so. Then, stick blend for emulsion. Next, add the fragrance oil and once again, stick blend to incorporate.

25. Step 7: Now, drag the spatula is a large circular pattern once through the bowl. Directly pick up the spatula when completed.

27. Step 9: After 24 hours, remove the soap from the mold. Then, with a knife, slice the bars. Allow them to further cure before using.

28. We hope that you enjoy our Energize Cold Process Soap Recipe!