Lavender Lemonade CP Soap Recipe

1. Other Ingredients & Equipment You'll Need:

2. Distilled Water

3. Mixing Bowls

4. Mixing Spoons

5. Rubber Spatula

6. Scale

7. Stick Blender

8. Vinegar

9. 3lb Loaf Mold

10. Skewer

11. Total Recipe Weights:

12. 292 grams Distilled Water

13. 144 grams Sodium Hydroxide (lye)

14. 210 grams Shea Butter

15. 210 grams Coconut Oil 76

16. 158 grams Sweet Almond Oil

17. 158 grams Sunflower Oil

18. 158 grams Mango Butter

19. 105 grams Apricot Kernel Oil

20. 53 grams Castor Oil

21. 74 grams Sparkling Lavender Lemonade Fragrance Oil

22. Colorants for Yellow CP Soap:

23. 5 drops Neon Yellow FUN Soap Colorant

24. Colorants for Lavender CP Soap:

25. 5 drops Ultramarine Violet FUN Soap Colorant

26. Colorants for Purple CP Soap:

27. 25 drops Ultramarine Violet FUN Soap Colorant

28. Colorants for Purple CP Soap:

29. 7 grams Titanium Dioxide (mixed with a small amount of your soaping oils)

30. Amounts for Yellow MP Soap:

31. 175 grams Diamond Clear Melt and Pour Soap Base

32. 2 drops Neon Yellow FUN Soap Colorant

33. 8 grams Sparkling Lavender Lemonade Fragrance Oil

34. Clean & Sanitize your work area and all of your packaging materials. It is suggested that you wear gloves, protective clothing, a face mask, safety glasses, and a hair net while preparing this recipe. Before attempting to make any cold process soap, please become familiar with Soap Making Safety Class.

35. Step 1: Prepare your lye solution. Allow the lye solution to cool to room temperature.

36. Step 2: While you are waiting for your lye solution to cool, prepare your soaping oils. Once your oils are melted, allow them to cool to room temperature.

37. Step 3: While you are waiting for your oils and lye solution to cool, titanium dioxide mixture as listed above.

38. Step 4: When both the soaping oils and the lye solution are at room temperature, prepare the melt and pour soap. Weigh out and melt the Diamond Clear MP Soap Base. Once melted add the fragrance oil and colorant. Stir. Set aside.

39. Step 5: Next, combine the lye solution with the soaping oils. Next, stick blend the soap batter to emulsify the ingredients. Next, add the Sparkling Lavender Lemonade Fragrance Oil. Once again, stick blend your soap batter to incorporate the scent.

40. Step 6: Begin dividing the soap batter. First, divide the soap batter in half. To one half, add the titanium dioxide mixture.

41. Step 7: Divide the remaining batter equally into three bowls. To one bowl, add the yellow colorant. To the second bowl, add the lavender colorant, and to the third bowl the darker purple colorant. Stir the contents on each bowl to blend the colorants.

42. Step 8: Now we will begin pouring the soap. First, pour all of the white soap batter into the mold. Place the mold in front of you. Pour the lavender soap batter in a line down the length of the mold. Repeat this process, pouring three of these lines. One on the right, one down the center, and one on the left.

43. Step 9: Pour the melt and pour soap next in the same manner you poured the lavender soap batter. Then, pour the darker purple in the same manner and finally, the yellow CP soap batter. Repeat the process, you will want to use all of the MP soap batter, but save about two ounces of each color of CP soap batter to top your soap.

44. Step 10: When topping the soap, pour a line of each color down the length of the mold. Then, use a skewer to swirl the top of the soap until you are happy with the swirls.

45. Step 11: Allow your soap to set up before removing it from the mold. Wait about 48 hours before cutting the soap. Then, allow it to cure for 4-6 weeks.

46. We hope that you enjoy this cold process soap recipe!