Palm Pillar Candles Recipe

1. Prepare your molds. You will need both the 3 x 4.5 inch and the 3 x 6.5 inch round pillar mold. Place a CD wick through the hole in the bottom of each of the molds. Then, you can place a plug in the bottom of the mold. Alternatively, you can use hot glue to completely seal the hole.

2. Now, weigh out and melt 40 ounces of Palm Pillar Wax. Melt the wax to 210F using a double boiler.

3. Once melted, use a toothpick to add a very small amount of the red liquid candle dye. Stir.

4. For this recipe, we recommend using either Brilliant Crystal Fragrance Oil or Carnation Fragrance Oil. Add 4 ounces of the fragrance oil. Once again, stir.

5. Pour the wax into the molds leaving about in the event that a second pour is needed.

6. When the wax has setup, but is still warm, poke relief holes.

7. Reheat the remaining wax to 210F and pour it into the molds.

8. Once the candles have setup, remove them from the molds and trim the wicks.

9. Your palm pillar candles are ready to use! Enjoy!